HOW TO FLASH ANDROID INTO INTERNAL MEMORY OF HTC PRO 2
I think this is the best time for me to update this tutorial, though no development is working on this phone but i think people are still buying it and are asking and googling so much about it.
I am a succesful USER of HTC PRO 2 and though i have upgraded to a newer Africa Techno N7 but still i can deny the goodness and tweaks of Htc pro 2.
Firstly i would introduce you the model of htc pro 2,We have 2 special tech spec which is the CDMA and GSM,some may not notice this before buying ,but before you will confidently say the model of your phone, you have to press,hold the volume button down holding it then press the power button ,it meant to show a tri-colour screen then from the top you can see the RHOD you are using.
The Rhod can be classified like these;CDMA=RHOD 400,500,800,***32M then GSM=RHOD100,210,3OO.
NB:ALSO KNOW THAT SPRINT AND VERIZON ARE CDMA AND TMOBILE AND ATT&T ARE GSM,SO WHEN YOUR PHONES COMES WITH ANY OF THESE CARRIER KNOW WHAT YOU WILL BE EXPECTING OR HAVE.FOR THOSE THAT THIER PHONE IS RHOD*** DONT SUFFER YOUR SELF BECAUSE ANDROID ON INTERNAL MEMORY DOES NOT WORK FOR THAT MODEL.
So if you are done with the above food for thought i think its time we know of our phone spec and capacity which you can see in the link here.
Upgrading your phone to Android is a good thing but if you have not try any of the custom roms buit for it i think you go here, pls know these phone varies ,cdma and gsm.
So assuming you just bought the phone and you dont know anything about an htc or even about flashing phones i think this guide will teach you everything you will do.
Before you start you will need to first unlock your phone if you are still using it from the host carrier, you will see whether it is unlocked at the top in the tri-colour boot loader mode screen if not so check out this link,so if it is unlocked then you also need to unlock the hardspl this can be done with this tool here for free though there is a donating version of it here.
I strongly recommend you pay attention now,know it very well that this tool can brick you phone and this means it will be unrepairable, so before you do anything kindly check if you phone is a Cdma or a Gsm,so if you do and you are sure then go on and flash your your phone with so_hardspl,T7373 option is for GSM and T7380 is for CDMA but make sure again and again.This procedure will update your spl, like my Rhod 400 was updated to 1.0olinex i dont know about Gsm users and if you have done that then you will be able to flash custom roms on your phone and android. This app does not work in his own it work with a synchronizer so if you are using windows 7 or 8 then you will have to download 'windows mobile device center' the if you use windows xp the you will download 'microsoft active synchronization' .If that is done make sure you phone is syncronizing then run the SO-hard spl to flash the spl.
N.B..HARDSPL FLASHING REQUIRES .1.LAPTOP OR DESKTOP 2 SYNCRONIZING APP INSTALLED 3 A USB CABLE TO YOR PHONE 4 THEN THE SO HARD SPL
pls know your model before flashing.
Then i will start with the next which is setting up your PC for flashing this tutorial can be found here or if you want to follow another follow this.
If you are done with that which is the main thing, i think is time i introduce to you the file you need to make your old winmo to a new android......
First of all you would have unlocked your hardspl which i have described above, then setup your adb and fastboot.
Download the rhodimg,nbh file and your android recovery image which can be found here...also get your Android gingerbred 3.5 full package and also your optional gapps file...... dont extract any'''
Then copy all the recovery image,gingerbred 3.5 and the gapps file to your sd card,then put the recovery img in your fastboot folders...
still updating this post.
No comments:
Post a Comment